Store Troubleshooting for information on manually restarting the database
instance.
Consider the following:
l
Check that a hardware Data Node power restore policy is set to Restore Last
State, which restarts the Data Node automatically after power loss, and attempts
to restore running processes. See the UCS C-Series GUI Configuration Guide for
more information on configuring the power restore policy in CIMC.
Data Store Communications Ports
The following diagram shows an example Stealthwatch architecture, with the
communication ports that should be opened. See the table for the ports associated with
each callout.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 21 -
Data Store Deployment Prerequisites and Recommendations
To Next Page
Loading...
