Cisco ONS 15454 M12 - NTP-G115 Clean Fiber Connectors

Figure 9: Replacing the Air Filter—AC Power Module
Step 4 Replace the air filter with a new one if the air filter is dirty or clogged with dust.
Step 5 Close the front door. If you removed the door, complete the NTP-G258 Install the Standard Door of the ONS
15454 M6 Shelf
Stop. You have completed this procedure.
NTP-G115 Clean Fiber Connectors
This procedure cleans the fiber connectors.Purpose
Inspection microscope
Type A Fiber Optic Connector Cleaner (CLETOP reel)
Optical swab
Optical receiver cleaning stick
Tools/Equipment
NonePrerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
Maintaining the ONS 15454 M12 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
11
Maintaining the ONS 15454 M12 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
NTP-G115 Clean Fiber Connectors