EasyManua.ls Logo

Cisco PTZ 4K Camera - Software compatibility; CE software; RoomOS software

Cisco PTZ 4K Camera
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera
D15296.12 Cisco Quad Camera, Precision 60, SpeakerTrack 60, PTZ-12, and PTZ 4K Camera JULY 2021.
Copyright © 2021 Cisco Systems, Inc. All rights reserved.
13
Camera guide
Software compatibility
Software for devices registered to an on-premises service
The camera software for the Quad Camera, Precision 60 and SpeakerTrack 60 cameras is automatically upgraded through the codec.
For the PTZ-12 and PTZ 4K cameras no software upgrade applies.
Minimum RoomOS and CE software version requirement for the codecs can be found in the table below:
Codec C90 Codec C40/C60 Codec SX80 Codec Plus Codec Pro
Quad Camera N/A N/A CE 9.2 CE 9.1 CE 9.4
Precision 60 N/A N/A TC 7.1, CE 8.1 CE 9.1 CE 9.4
SpeakerTrack 60 TC 7.1 TC 7.1 TC 7.1, CE 8.1 CE 9.10 CE 9.4
P T Z-12
1
N/A N/A CE 9.6 CE 9.6 CE 9.6
PTZ 4K N/A N/A N/A RoomOS 10.3, CE.9.15.3 RoomOS 10.3, CE.9.15.3
Software for devices registered to Webex
The camera software for the Quad Camera, Precision 60 and SpeakerTrack 60 cameras is automatically upgraded through the codec when a new version is available from the cloud service.
For the PTZ-12 and PTZ 4K cameras no software upgrade applies.
1
Only one PTZ-12 camera is supported on CE9.6. Multiple PTZ-12 cameras are supported from CE9.7.
Contents
Introduction
Physical interface
Connecting to a codec
Appendix
Factory reset
Connecting to a codec

Related product manuals