1
Introduction
Linksys Wireless-N Range Extender
Introduction
This Getting Started guide can help you connect the extender to your network
and solve common setup issues. You can find more help from our award-
winning, 24/7 customer support at Linksys.com/support.
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
How to install the range extender . . . . . . . . . . . . . . . . 2
How to access the browser-based utility . . . . . . . . . . 5
Using Wi-Fi Protected Setup . . . . . . . . . . . . . . . . . . . . . 7
How to use Site Survey . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Overview
Front
This light indicates the power and the Wi-Fi Protected Setup status. After
initial setup, if you have client devices, such as wireless printers, that
support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to
automatically configure wireless security for your wireless network.
Power When the extender is powered on, resets to factory
defaults, or upgrades its firmware, the light flashes slowly
(about every three seconds). When the extender is ready for use,
the light is continuously lit. If there is an error, the light flashes
quickly (about every second); disconnect the extender from the
wall mount socket, wait two seconds, and then reconnect it.
Wi-Fi Protected Setup When the Wi-Fi Protected Setup process
is active, the light flashes slowly (about every two seconds) for
two minutes. When the Wi-Fi Protected Setup is successful,
the light is continuously lit. If there is an error, the light flashes
quickly (about every second) for two minutes; please wait and
try again.
To Next Page
Loading...
Need help?
General
