Step 3. A confirmation window appears. Click Yes to continue.
Step 4. After the reboot is completed, login with the default credentials. The default
username is cisco and the default password is cisco.
Hardware Reset
Step 1. Press the Reset button located at the back of the device with a pin for approximately
15 seconds or until the power light on the front of the device starts flashing.
The Router reloads and is set to the default configuration settings.
Step 2. Login with the default credentials. The default username is cisco and the default
password is cisco.
Rebooting the Device
The router can be reset to the factory default settings through either the web configuration
utility or the power button on the back of the router.
Reboot with the use of the Web Configuration Utility
To Next Page
Loading...
