© 2013-2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.  Page 2 of 4 
Product Specifications 
Table 1 lists the product specifications for the Cisco RV320. 
Table 1.  Product Specifications 
● 
Dual Gigabit Ethernet Ports 
● 
Failover 
● 
Load balancing 
● 
802.3, 802.3u 
● 
IPv4 (RFC 791) 
● 
IPv6 (RFC 2460) 
● 
Dynamic Host Configuration Protocol (DHCP) server, DHCP client, DHCP relay agent 
● 
Static IP 
● 
Point-to-Point Protocol over Ethernet (PPPoE) 
● 
Point-to-Point Tunneling Protocol (PPTP) 
● 
Transparent bridge 
● 
DNS relay, Dynamic DNS (DynDNS.org, 3322.org), DNS local database 
● 
IPv6 
● 
Routing Information Protocol (RIP) v1 and v2, and RIP for IPv6 (RIPng) 
● 
Inter-VLAN routing 
● 
Static routing  
● 
VLANs supported: 7 
Network Address Translation 
(NAT) 
● 
Port Address Translation (PAT) 
● 
One-to-one NAT 
● 
NAT traversal 
Protocols can be bound to a specific WAN port for load-balancing purposes 
Storage and 3G/4G modem support 
● 
SPI firewall 
● 
Denial-of-service (DoS) prevention: ping of death, SYN flood,  IP spoofing, WinNuke 
● 
Schedule-based access rules 
● 
Up to 50 entries 
Java, cookies, ActiveX, HTTP proxy 
Static URL blocking or keyword blocking 
● 
HTTPS web access to device manager 
● 
Username/password complexity enforcement 
802.1Q VLAN 
7 VLANs supported 
● 
25 IPsec site-to-site tunnels for branch office connectivity  
● 
25 IPsec VPN tunnels via Cisco VPN client and third-party clients such as “The GreenBow” for remote-
access VPN connectivity 
10 SSL VPN tunnels for remote client access 
10 PPTP tunnels for remote access 
● 
Data Encryption Standard (DES) 
● 
Triple Data Encryption Standard (3DES) 
● 
Advanced Encryption Standard (AES) encryption: AES-128, AES-192, AES-256