Cisco SFE2000P Datasheet

Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 7
Features
●
Twenty-four 10/100 Ethernet ports plus four 10/100/100 copper ports
●
Two Small Form-Factor Pluggable (SFP) slots (shared with two copper ports) for fiber Gigabit Ethernet
expansion
●
IEEE 802.3af PoE delivered over any of the twenty-four 10/100 ports
●
Maximum per-switch PoE delivery of 180W for all
●
Dual images for resilient firmware upgrades
●
12.8-Gbps, non-blocking, store-and-forward switching capacity
●
Simplified quality of service (QoS) management using 802.1p, Differentiated Services (Diffserv), or type of
service (ToS) traffic prioritization specifications
●
Fully resilient stacking provides optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Can be configured and monitored from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) Protocol and Secure Sockets Layer (SSL)
encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and security
●
Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks
●
Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
(GVRP) and Generic Attribute Registration Protocol (GARP)
●
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with link aggregation
●
Enhanced rate-limiting capabilities, including back pressure, multicast, and broadcast flood control
●
Port mirroring for noninvasive monitoring of switch traffic
●
Mini jumbo frame support (1600 bytes)
●
Simple Network Management Protocol (SNMP) v1, v2c, v3 and Remote Monitoring (RMON) support
●
Fully rack-mountable using the included rack-mounting hardware
●
Simple one-step automated installation and initial configuration
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SFE2000P 24-Port
10/100 Ethernet Switch.
Table 1. Specifications for the Cisco SFE2000P 24-Port 10/100 Ethernet Switch: PoE
Feature Description
Specifications
Ports
●
24 RJ-45 connectors for 10BASE-T/100BASE-TX
●
Four 10BASE-T/100BASE-TX/1000BASE-T with 2 Gigabit combo ports
●
Shared between mini Gigabit Interface Converter (mini-GBIC) ports
●
Console port
●
Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
●
Auto negotiate/manual setting
●
RPS port for connecting to redundant power supply unit
Buttons Reset button

Cisco SFE2000P Specifications

General

Brand	Cisco
Model	SFE2000P
Category	Network Router
Language	English