EasyManuals Logo
Home>Cisco>Network Router>SFE2000P

Cisco SFE2000P Datasheet

Cisco SFE2000P
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 7
Feature Description
Access control
ACLs: drop or rate limit based on:
Source and destination MAC based
Source and destination IP address
Protocol
Port
VLAN
Differentiated services code point (DSCP)/IP precedence
TCP/User Datagram Protocol (UDP) source and destination ports
802.1p priority
Ethernet type
Internet Control Message Protocol (ICMP) packets
Internet Group Management Protocol (IGMP) packets
Up to 1018 rules
Availability
Link aggregation
Link aggregation using IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 ports in up to 8 groups
Storm control Broadcast and multicast storm protection
DoS prevention DoS attack prevention
Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree, Fast
Linkover
IGMP snooping IGMP (v1/v2) snooping limits bandwidth-intensive video traffic to only the requestors. Supports 256 multicast
groups
QoS
Priority levels 4 hardware queues
Scheduling Priority queuing and weighted round-robin (WRR)
Class of service
Port based
802.1p VLAN priority based
IPv4/v6 IP precedence/ToS/DSCP based
DiffServ
Classification and remarking ACLs
Rate limiting
Ingress policer
Egress rate control
Standards
802.3 10BASE-T Ethernet
802.3u 100BASE-TX Fast Ethernet
802.3ab 1000BASE-T Gigabit Ethernet
802.3z Gigabit Ethernet
802.3x flow control
802.3ad LACP
802.3af PoE
802.1d Spanning Tree Protocol (STP)
802.1Q/p VLAN
802.1w Rapid STP
802.1s Multiple STP
802.1X port access authentication
Environmental
Dimensions
W x D x H
17.32 x 14.70 x 1.73 in.
(440 x 375 x 44 mm)
Unit weight 10.89 lb (4.94 kg)
Certification UL (UL 60950), CSA (CSA 22.2), CE Mark, FCC Part 15 (CFR 47) Class A
Operating temperature 32º to 104ºF (0º to 40ºC)
Storage temperature –4º to 158ºF (–20º to 70ºC)
Operating humidity 10% to 90% relative humidity, noncondensing

Other manuals for Cisco SFE2000P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SFE2000P and is the answer not in the manual?

Cisco SFE2000P Specifications

General IconGeneral
BrandCisco
ModelSFE2000P
CategoryNetwork Router
LanguageEnglish

Related product manuals