Cisco SG300-28PP User Manual

14 Cisco 300 Series Managed Switches
Console—The Console port is where you can connect a serial cable to a
computers serial port for configuration using a terminal emulation program.
Returning the Device to the Factory
Default Settings
To use the Reset button to reboot or reset the managed switch, do the
following:
•To reboot the managed switch, press the Reset button for less than 10
seconds.
• To restore the managed switch configuration to the factory default
settings:
1. Disconnect the managed switch from the network or disable all
DHCP servers on your network.
2. With the power on, press-and-hold the Reset button for more than
10 seconds.
5

Cisco SG300-28PP Specifications

General

Model	SG300-28PP
Ports	28
PoE Ports	24
PoE Power Budget	195 W
Switching Capacity	56 Gbps
Forwarding Rate	41.67 Mpps
Layer	Layer 3
Form Factor	Rack-mountable
Power Supply	Internal
Dimensions	440 x 257 x 44 mm
MAC Address Table Size	16384 entries
VLANs	256
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Jumbo Frame Support	9216 bytes