Need help?Do you have a question about the Cisco SG500X-24 and is the answer not in the manual?
General| Model | SG500X-24 |
|---|---|
| Port Count | 24 |
| Layer | Layer 3 |
| Switching Capacity | 56 Gbps |
| Power over Ethernet (PoE) | No |
| Jumbo Frame Support | Yes (up to 9216 bytes) |
| Power Device | Internal |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Weight | 10.41 lb (4.72 kg) |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40 to 70 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% (non-condensing) |
| MAC Address Table Size | 32, 000 entries |
Lists items included in the switch package for setup.
Table listing high temperature ratings for different switch models.
Instructions and diagrams for mounting the switch in a standard 19-inch rack.
Detailed steps for configuring the switch using its IP address via a web browser.
Step-by-step guide for configuring the switch using a console port and terminal application.
Details RJ-45 Ethernet and SFP ports for connectivity and stacking.
Explains the status indicators (LEDs) on the front panel of the switches.
Information on the reset button and ports located on the back panel.
To Next Page
