Need help?Do you have a question about the Cisco SG500X-24P and is the answer not in the manual?
General| Model | SG500X-24P |
|---|---|
| Ports | 24 |
| PoE Ports | 24 |
| PoE Power Budget | 370W |
| Switching Capacity | 128 Gbps |
| DRAM | 512 MB |
| Flash Memory | 256 MB |
| Power Supply | Internal |
| Layer | Layer 3 |
| Rack Mountable | Yes |
| MAC Address Table Size | 32K entries |
| Dimensions (W x D x H) | 440 x 44 mm |
| Operating Temperature | 0 to 45 °C |
| Storage Temperature | -40 to 70 °C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 95% non-condensing |
| Jumbo Frame Support | 9K bytes |
Details critical environmental conditions to avoid, such as high ambient temperatures and airflow.
Highlights critical warnings and cautions related to connecting switches that supply Power over Ethernet.
Details the process for configuring the switch via its IP network using a web browser.
Describes the various operating modes for stack units: Standalone, Native, Basic Hybrid, Advanced Hybrid, and Advanced Hybrid XG.
Explains the meaning and behavior of each LED indicator on the switch's front panel.
Explains how to use the reset button for rebooting or restoring the switch to factory default settings.
Lists potential causes and resolutions for connection issues like bad Ethernet or console port connections.
To Next Page
