
Do you have a question about the Cisco SG550X-24MPP and is the answer not in the manual?
| Model | SG550X-24MPP | 
|---|---|
| Ports | 24 | 
| Power over Ethernet (PoE) | Yes | 
| PoE Budget | 370W | 
| Switching Capacity | 128 Gbps | 
| Forwarding Rate | 95.2 Mpps | 
| Layer | Layer 3 | 
| Jumbo Frame Support | Yes, up to 9216 bytes | 
| Features | VLAN support | 
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p | 
| AC Input Voltage | 100-240V AC | 
| Uplink Ports | 4 x 10GE SFP+ | 
| MAC Address Table Size | 32K entries | 
Advice on environmental factors and stability for switch placement.
Instructions on how to mount the switch in a standard 19-inch rack.
Guide to accessing and setting up the switch via its web-based interface.
Steps for managing the switch through its console port using terminal emulation.
Description of the USB, RJ-45 Ethernet, 60-Watt PoE, and SFP+ ports.
Explanation of the status indicators (LEDs) on the switch's front panel.