Cisco SG550X-24MPP Administration Guide

Security
RADIUS
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 331
17
- Reset—Device was reset by the administrator.
• User Name—Name of the rejected user.
• User Type—Displays one of the following authentication options relevant to the user:
- Login—Management access user.
- 802.1x—802.1x network access user.
- N/A—For Reset event.
• Reason—Reason that the user was rejected.
• Time—Time that the user was rejected.
STEP 2 To see additional details for the rejected user, select the user and click Details.
The following fields are displayed:
NOTE The fields in this page depend on the type of account viewed and the details received for it. Not
all fields are always displayed.
• Event Time—See above.
• User Name—See above.
• User Type—See above.
• Rejection Reason—Reason that the user was rejected.
• NAS IP Address—Address of the Network Accessed Server (NAS). The NAS is the
switch running the RADIUS client.
To clear out the table of rejected users, click Clear.
RADIUS Server Unknown NAS Entries
To display authentication rejections due to NASs not being known to RADIUS server.
STEP 1 Click Security > RADIUS Server > RADIUS Server Unknown NAS Entries.
The following fields are displayed:
• (Log) Event Type
- Unknown NAS—An unknown NAS event occurred.
- Time Change—Clock on device was changed by the administrator.
- Reset—Device was reset by the administrator.

Cisco SG550X-24MPP Specifications

General

Brand	Cisco
Model	SG550X-24MPP
Category	Switch
Language	English