Cisco Small Business AP541N User Manual

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide 3
Getting Started with the
Configuration
This procedure describes how to access the Access Point Configuration
Utility:
• By using the default IP address of the access point., follow the
instructions in the “Display the Configuration Utility By Using the
Default IP Address” section if you are not using Cisco Configuration
Assistant (CCA).
• If you are using the Cisco AP541N in the DHCP client mode in a network
supported by CCA, follow the instructions in Display the Configuration
Utility by Using CCA.
CAUTION If the access point IP address is changed, either by a DHCP
server or manually, your link to the access point will be lost
and you must enter the new IP address to use the Access
Point Configuration Utility.
235175
Ethernet
Powe
r
2

Cisco Small Business AP541N Specifications

General

Brand	Cisco
Model	Small Business AP541N
Category	Wireless Access Point
Language	English