To Next PageTo Next Page
Need help?Do you have a question about the Cisco Small Business AP541N and is the answer not in the manual?
General| Model | AP541N |
|---|---|
| Wireless Standard | 802.11n |
| Frequency Bands | 2.4 GHz |
| MIMO Technology | Yes |
| Maximum Data Rate | 300 Mbps |
| Ethernet Ports | 1 x 10/100/1000 |
| Power over Ethernet (PoE) | 802.3af |
| Antenna | Internal |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Security | WPA, WPA2, 802.1X |
Explains the status indicators on the front panel of the access point for operational monitoring.
Details the connectors and ports located on the rear of the access point for network and power.
Step-by-step guide to access the AP's configuration utility using its default IP address.
Procedure for configuring the access point using the Cisco Configuration Assistant (CCA) utility.
Lists the factory default parameters for the wireless network, including SSID and security.
How to use the 'ping' command to diagnose communication issues with the access point.
Explains common reasons for connectivity problems, such as IP address conflicts or DHCP issues.
Instructions on how to restore the access point to its original factory default settings using the Reset button.
General guidance on proper placement and environmental considerations for installing the access point.
Detailed steps for securely mounting the access point onto a wall surface.
Instructions for placing the access point on a stable flat surface, such as a desk.
Steps to connect the device to power and establish a network link via Ethernet cable.
Procedures to confirm that the access point hardware has been correctly connected and installed.
Provides links to Cisco support communities, technical documentation, and other helpful resources.
