Cisco SPA 508G Quick Reference Guide

Barracuda Phone System
Cisco SPA 500 Series Quick Reference Guide 3 / 4
Ringer and Handset Volume
To change the ringer volume when the phone is idle, press the volume up and volume down
buttons at the right side of the keypad.
To change the volume of the handset or speakerphone, during an active call, press the volume
up and volume down buttons.
To toggle mute on and off, during an active call, press the red mute button.

Cisco SPA 508G Specifications

General

Speakerphone	Yes
Dialer location	Base
Mac compatibility	No
Ethernet LAN (RJ-45) ports	2
Display resolution	128 x 64 pixels
Display number of colors	Monochrome
Headphone connectivity	2.5 mm

Weight and Dimensions

Depth	212 mm
Width	214 mm
Height	44 mm
Weight	900 g