Router Configuration Parameters
<WAN_Interface> WAN Interface Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 152
7
<WAN_PPPoE_Password> Description: Configures the interface settings for defined VLAN sub
interfaces. VLAN ID n must be previously defined in the VLAN_ID_
Index tag. This tag defines the password for PPPoE session
configured over the sub interface. Note: the value of this field is
hidden when reading the config.xml file from the device.
User Interface: Interface Setup > Basic Setup > Internet Settings
page, Password field (available when PPPoE is the Connection Type)
Values: password (up to 64 characters)
Default: commented out,
<!-- <WAN_PPPoE_Password></WAN_PPPoE_
Password>-->
Example:
<WAN_PPPoE_Password>my-password</WAN_PPPoE_Password>
<WAN_PPPoE_Service_Name> Description: Descriptive service name (provided by the ISP), for a
PPPoE session.
User Interface: Interface Setup > Basic Setup > Internet Settings
page, Service Name field (available when PPPoE is the Connection
Typ e)
Parameter: Service name
Values: name (up to 64 characters)
Default: null
Example:
<WAN_PPPoE_Service_Name>ServiceX_PPP</WAN_PPPoE_Service_Name>
Parameter Details
To Next Page
Loading...
