EasyManuals Logo

Cisco SPA112 Administration Guide

Cisco SPA112
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
Configuring the Voice Settings
User 1 and User 2
Cisco SPA100Series Administration Guide 101
4
Selective Call Forward Settings
Field Description
Cfwd Sel1-8 Caller Caller number pattern to trigger Call Forward Selective
service. When the caller’s phone number matches the
entry, the call is forwarded to the corresponding Cfwd
Selective Destination (Cfwd Sel1-8 Dest).
Use ? to match any single digit.
Use * to match any number of digits.
Example: 1408*, 1512???1234
In the above example, a call is forwarded to the
corresponding destination if the caller ID either starts with
1408 or is an 11-digit numbering starting with 1512 and
ending with 1234.
Default setting: blank
Cfwd Sel1-8 Dest The destination for the corresponding Call Forward
Selective caller pattern (Cfwd Sel1-8 Caller).
Default setting: blank
Cfwd Last Caller The number of the last caller; this caller is actively
forwarded to the Cfwd Last Dest via the Call Forward Last
service. For more information, see Vertical Service
Activation Codes.
Default setting: blank
Cfwd Last Dest The destination for the Cfwd Last Caller.
Block Last Caller The number of the last caller; this caller is blocked via the
Block Last Caller Service. For more information, see
Vertical Service Activation Codes.
Default setting: blank
Accept Last Caller The number of the last caller; this caller is accepted via the
Accept Last Caller Service. For more information, see
Vertical Service Activation Codes.
Default setting: blank

Table of Contents

Other manuals for Cisco SPA112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA112 and is the answer not in the manual?

Cisco SPA112 Specifications

General IconGeneral
Supported network protocolsIPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP clientYes
VPN support802.1p
Security algorithmsSSL/TLS
Authentication methodSIP
Modem (RJ-11) ports2
Ethernet LAN (RJ-45) ports1
Voice codecsG.711, G.726, G.729
CertificationFCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibilityT.38
Output current2 A
Output voltage5 V
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Width101 mm
Height28 mm
Weight153 g

Related product manuals