Cisco SPA112 Administration Guide

Configuring the Voice Settings
User 1 and User 2
Cisco SPA100Series Administration Guide 102
4
Speed Dial Settings
Supplementary Service Settings (User)
Field Description
Speed Dial 2-9 Target phone number (or URL) assigned to speed dial 2, 3,
4, 5, 6, 7, 8, or 9.
Default setting: blank
Field Description
CW Setting Call Waiting on/off for all calls.
Default setting: yes
Block CID Setting Block Caller ID on/off for all calls.
Default setting: no
Block ANC Setting Block Anonymous Calls on or off.
Default setting: no
DND Setting DND on or off.
Default setting: no
CID Setting Caller ID Generation on or off.
Default setting: yes
CWCID Setting Call Waiting Caller ID Generation on or off.
Default setting: yes
Dist Ring Setting Distinctive Ring on or off.
Default setting: yes

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g