Cisco SPA112 Administration Guide

Using the IVR for Administration
Cisco SPA100Series Administration Guide 134
8
Check Line 2 SIP
Tran sp or t
1920
Exit IVR 3948
(Spells
EXIT on
the phone
keypad)
Allow or prevent WAN
access to the
administration web
server
7932 1: Enable
0: Disable
Factory Reset of Unit
WARNING: All non-
default settings will be
lost. This includes
network and service
provider data.
73738
(Spells
RESET on
the phone
keypad)
When prompted, press 1 to confirm,
or press * (star) to cancel. After you
hear “Option successful,” hang up the
phone. The ATA reboots.
NOTE: This action is equivalent to
Pressing and holding the RESET
button for 10 seconds.
Reboot of Voice System 732668
(Spells
REBOOT
on the
phone
keypad)
After you hear “Option successful,”
hang up the phone. The ATA reboots.
NOTE: This action is equivalent to
Pressing and immediately releasing
the RESET button.
User Factory Reset of
Unit
WARNING: All user-
changeable non-default
settings will be lost. This
may include network and
service provider data.
877778 When prompted, press 1 to confirm,
or press * (star) to cancel. After you
hear “Option successful,” hang up the
phone. The ATA reboots.
IVR Action Menu
Option
Choices and Instructions

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g