Cisco SPA112 Administration Guide

Using the IVR for Administration
Cisco SPA100Series Administration Guide 133
8
Set Network Mask 121 To enter the value, press numbers on
the telephone key pad. Press the *
(star) key to enter a decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check Gateway IP
Address
130
Set Gateway IP Address 131 To enter the value, press numbers on
the telephone key pad. Press the *
(star) key to enter a decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check MAC Address 140
Check Firmware Version 150
Check Primary DNS
Server Setting
160
Set Primary DNS Server 161 To enter the value, press numbers on
the telephone key pad. Press the *
(star) key to enter a decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check INTERNET web
server port
170
SPA122 only: Check LAN
IP address (ETHERNET
port)
210
Announce Line 1 SIP
Tran sp or t
1910
IVR Action Menu
Option
Choices and Instructions

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g