Cisco SPA112 Administration Guide

Configuring the Voice Settings
SIP
Cisco SPA100Series Administration Guide 60
4
Linksys Key System Parameters
EXT IP External IP address to substitute for the actual IP address
of the ATA in all outgoing SIP messages. If 0.0.0.0 is
specified, no IP address substitution is performed.
If this parameter is specified, the ATA assumes this IP
address when generating SIP messages and SDP (if NAT
Mapping is enabled for that line) However, the results of
STUN and VIA received parameter processing, if available,
supersede this statically configured value.
This option requires that you have (1) a static IP address
from your Internet Service Provider and (2) an edge device
with a symmetric NAT mechanism. If the ATA is the edge
device, the second requirement is met.
Default setting: blank
EXT RTP Port Min External port mapping number of the RTP Port Min.
number. If this value is not zero, the RTP port number in all
outgoing SIP messages is substituted for the
corresponding port value in the external RTP port range.
Default setting: blank
NAT Keep Alive
Intvl
Interval between NAT-mapping keep alive messages.
Default setting: 15
Redirect Keep
Alive
Interval between NAT Redirect keep alive messages.
Default setting: 15
Field Description
Linksys Key
System
To enable operation with the Cisco SPA9000, choose yes.
Otherwise, choose no.
Default setting: no
Multicast Address The multicast address for devices in the Cisco SPA9000
voice network.
Default setting: 224.168.168.168:6061
Key System Auto
Discovery
To enable auto-discovery of the Cisco SPA9000 voice
system, choose yes. Otherwise, choose no.
Default setting: yes
Field Description

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g