Cisco SPA112 Administration Guide

Configuring the Voice Settings
Line1 and Line 2 Settings (PHONE Port1 and PHONE2)
Cisco SPA100Series Administration Guide 94
4
Call Redial Serv Enable Call Redial Service.
Call Back Serv Enable Call Back Service.
Three Way Call
Serv
Enable Three Way Calling Service. Three Way Calling is
required for Three Way Conference and Attended
Tran sfer.
Default setting: yes
Three Way Conf
Serv
Enable Three Way Conference Service. Three Way
Conference is required for Attended Transfer.
Default setting: yes
Attn Transfer Serv Enable Attended Call Transfer Service. Three Way
Conference is required for Attended Transfer.
Default setting: yes
Unattn Transfer
Serv
Enable Unattended (Blind) Call Transfer Service.
Default setting: yes
MWI Serv Enable MWI Service. MWI is available only if a Voice Mail
Service is set-up in the deployment.
Default setting: yes
VMWI Serv Enable VMWI Service (FSK)
Default setting: yes
Speed Dial Serv Enable Speed Dial Service.
Default setting: yes
Secure Call Serv Secure Call Service. If this feature is enabled, a user can
make a secure call by entering an activation code (*18 by
default) before dialing the target number. Then audio
traffic in both directions is encrypted for the duration of
the call.
Default setting: yes
Star codes are set in Vertical Service Activation Codes.
To enable secure calling by default, without requiring a
star code, set the user’s Secure Call Setting to yes. See
User 1 and User 2, page 100.
Referral Serv Enable Referral Service. See the Referral Services Codes
parameter For more information.
Default setting: yes
Field Description

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g