Cisco SPA122 Provisioning Guide

Router Configuration Parameters
<WAN_Interface> WAN Interface Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 149
7
<WAN_Interface> WAN Interface Parameters
This section describes the parameters in the <WAN_Interface> section of the
config.xml file.
TIP: You can click the <WAN_Interface> heading in the XML file to expand or
collapse the nested parameters in this section.
NOTE In addition to the descriptions, also refer to WAN Example 1: DHCP with automatic
MTU mode, page 153, WAN Example 2: Static IP with manual MTU mode,
page 154, and WAN Example 3: PPPoE with Connect on Demand, page 154.
Parameter Details
<WAN_Connection_Type> Description: Defines the connection/addressing mode used for the
INTERNET (WAN) port.
User Interface: Network Setup > Basic Setup > Internet Settings
page, Connection Type field
Values:
• dh: DHCP
• st: Static
• pp: PPPoE
Default: dh
Example: Static connection type
<WAN_Connection_Type>st</WAN_Connection_Type>

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg