Cisco SPA122 Provisioning Guide

Router Configuration Parameters
<WAN_VLAN_Setting> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 167
7
<WAN_VLAN_Setting> Parameters
This section describes the parameters in the <WAN_VLAN_Setting> section of the
config.xml file.
NOTE In addition to the descriptions, also refer to <WAN_VLAN_Setting> Example:
VLAN Enabled with ID 100, page 168.
Parameter Details
<WAN_VLAN_Enable> Description: Enables or disables a VLAN on your network
User Interface: Network Setup > Advanced Settings > VLAN page,
Enable VLAN field
Values:
0: Disabled
1: Enabled
Default: 0
Example: VLAN enabled
<WAN_VLAN_Enable>1</WAN_VLAN_Enable>
<WAN_VALN_ID> Description: A number that identifies the VLAN
User Interface: Network Setup > Advanced Settings > VLAN page,
VLAN ID field
Values: 1~4094
Default: 1
Example: VLAN ID 100
<WAN_VALN_ID>100</WAN_VALN_ID>

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg