Cisco SPA122 - Reset_Button_Enable

Router Configuration Parameters
<Reset_Button_Enable>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 183
7
<Reset_Button_Enable>
NOTE No other settings are nested below <Reset_Button_Enable>.
Parameter Details
<Reset_Button_Enable> Description: Enables or disables the RESET button
User Interface:
Values:
0: Disabled (button)
1: Enabled (button can be pressed for 1-2 seconds for reboot
and 5-6 seconds for a factory reset)
Default: 1
Example: Button disabled
<Reset_Button_Enable>0</<Reset_Button_Enable>