Cisco SPA122 - Page 166

Router Configuration Parameters
<DHCP_Server_Pool> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 166
7
<DHCP_Server_Pool> Example: DHCP enabled with two
DHCP reservations
<router-configuration>
...
<DHCP_Server_Pool>
<Rule>
<DHCP_Server>1</DHCP_Server>
<Local_IP>192.168.15.1</Local_IP>
<Subnet_Mask>255.255.255.0</Subnet_Mask>
<DHCP_Client_Table>58:8D:09:72:73:DA 192.168.15.100 on Computer-
1;00:22:68:19:EF:83 192.168.15.101 on Computer-2;</DHCP_Client_Table>
<TFTP_IP>0.0.0.0</TFTP_IP>
<Starting_IP>192.168.15.100</Starting_IP>
<Max_DHCP_User>50</Max_DHCP_User>
<Client_Lease_Time>0</Client_Lease_Time>
<Default_Gateway>192.168.15.1</Default_Gateway>
</Rule>
</DHCP_Server_Pool>
...
</router-configuration>
<Default_Gateway> Description: Enter the IPv4 address of the default gateway to be
used by the DHCP clients.
Default: 192.168.15.1
Example:
<Default_Gateway>192.168.15.1</Default_Gateway>
Parameter Details