Router Configuration Parameters
<DHCP_Server_Pool> Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 165
7
<Max_DHCP_User> Description: The maximum number of devices that can receive
DHCP addresses from the DHCP server
User Interface: Network Setup > Basic Setup > Network Settings
page, Maximum DHCP Users field
Values: number
Default: 50
Example: 10-device maximum
<Max_DHCP_User>10</Max_DHCP_User>
<Client_Lease_Time> Description: The number of minutes that a dynamically assigned
IPv4 address can be in use, or “leased”
User Interface: Network Setup > Basic Setup > Network Settings
page, Client Lease Time field
Values: number
Enter the number of minutes. Enter 0 to represent 1 day. Enter 9999 to
never expire.
Default: 0 (1 day)
Example: No expiration
<Client_Lease_Time>9999</Client_Lease_Time>
<Static_DNS> Description: Defines a DNS server address that will be provided to
DHCP clients. If DNS Proxy is enabled, clients will automatically be
issued the Local IPv4 address to use for DNS.
Values: IPv4 address
Default: 0.0.0.0
Example:
<Static_DNS>209.165.202.129</Static_DNS>
Parameter Details
To Next Page
Loading...
