Cisco SPA122 - Page 154

Router Configuration Parameters
<WAN_Interface> WAN Interface Parameters
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 154
7
WAN Example 2: Static IP with manual MTU mode
<router-configuration>
...
<WAN_Interface>
<WAN_Connection_Type>st</WAN_Connection_Type>
<WAN_DHCP_MTU_Mode>0</WAN_DHCP_MTU_Mode>
<WAN_DHCP_MTU_Size>0</WAN_DHCP_MTU_Size>
<WAN_Static_IP_NET>10.1.1.1:255.255.255.0:10.1.1.254:10.1.1.2:10.1.1.3</
WAN_Static_IP_NET>
<WAN_Static_MTU_Mode>1</WAN_Static_MTU_Mode>
<WAN_Static_MTU_Size>1492</WAN_Static_MTU_Size>
</WAN_Interface>
...
</router-configuration>
WAN Example 3: PPPoE with Connect on Demand
<router-configuration>
...
<WAN_Interface>
<WAN_Connection_Type>pppoe</WAN_Connection_Type>
<WAN_DHCP_MTU_Mode>0</WAN_DHCP_MTU_Mode>
<WAN_DHCP_MTU_Size>0</WAN_DHCP_MTU_Size>
<WAN_Static_IP_NET>0.0.0.0:0.0.0.0:0.0.0.0</WAN_Static_IP_NET>
<WAN_Static_MTU_Mode>0</WAN_Static_MTU_Mode>
<WAN_Static_MTU_Size>0</WAN_Static_MTU_Size>
<WAN_PPPoE_User_Name>test@example.net</WAN_PPPoE_User_Name>
<WAN_PPPoE_Password>my-password</WAN_PPPoE_Password>
<WAN_PPPoE_Service_Name>ServiceX_PPP</WAN_PPPoE_Service_Name>
<WAN_PPPoE_Keep_Alive>1:5:30</WAN_PPPoE_Keep_Alive>
<WAN_PPPoE_MTU_Mode>0</WAN_PPPoE_MTU_Mode>
<WAN_PPPoE_MTU_Size>0</WAN_PPPoE_MTU_Size>
</WAN_Interface>
...
</router-configuration>