Cisco SPA122 Provisioning Guide

In-House Preprovisioning and Provisioning Servers
Provisioning Server Setup
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters 45
3
Syslog Server
If a syslog server is configured on the ATA (using the <Syslog_Server> or
<Debug_Server> parameters), the resync and upgrade operations log messages
to the syslog server. A message can be generated at the start of a remote file
request (configuration profile or firmware load), and at the conclusion of the
operation (indicating either success or failure).
The logged messages themselves are configured in the following parameters:
• For profile resync:
- Log_Resync_Request_Msg
- Log_Resync_Success_Msg
- Log_Resync_Failure_Msg
• For firmware upgrades:
- Log_Upgrade_Request_Msg
- Log_Upgrade_Success_Msg
- Log_Upgrade_Failure_Msg
These parameters are macro expanded into the actual syslog messages.
As indicated in the lower half of the diagram, a Cisco Client Certificate Root
Authority signs each unique certificate. The corresponding root certificate is made
available to service providers for client authentication purposes.

Cisco SPA122 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Mbps Ethernet
Voice Protocol	SIP
Voice Codecs	G.711, G.726, G.729 A
Security	TLS
Power Supply	5V DC, 2A
Network Ports	1 x 10/100 Mbps
Fax Support	T.38 fax relay
Operating Temperature	0°C to 45°C
Storage Temperature	14 to 140°F (-10 to 60°C)
Humidity	10% to 90% noncondensing
Weight	0.16 kg