Configure Ring Type on SPA500 and SPA300
Series
Objectives
The SPA500 and SPA300 IP phone allows you to change the ring type (or ring tone) from a
list of tones already included in the phone. This document explains how to change the ring
type on the SPA500 and SPA300.
Applicable Devices
• SPA500 Series
• SPA300 Series
Configure Ring Types
Step 1. Press the Setup button to open the Setup menu.
Step 2. Navigate to Settings and press Select using the soft-key.
Step 3. Navigate to Ring Type and press Select using the soft-key.
Step 4. Press Select to display the ring type options.
To Next Page
Need help?
General