Cisco SPA504G User Guide

SPA Phone User Guide
Elliott Killingbeck – © Indigo IT LTD 2012 – v1.1 – 29-03-2012
Retrieving voicemails (Internally):
If a voicemail is waiting in the system, a red bar will light up at the top of the phone, and an
envelope icon will appear next to the line on which the voicemail was received.
To retrieve the voicemail, press the line button which corresponds to the line on which the voicemail
was recorded.
Then press the envelope button on the bottom panel of the phone.
You will be asked to enter your “access code”. The default for this is “0 0 0 0”.
If you are not asked for an access code, it can be changed via main menu option 3, and then sub-
menu option 1.
You are advised to change your access code from the default, as this system is accessible externally
via a voicemail phone number. This is explained in the next section.

Cisco SPA504G Specifications

General

Brand	Cisco
Model	SPA504G
Category	IP Phone
Language	English