32
Chapter 5: Configuring the Switch through the Web Utility
IP Config
24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet
Select the IP Address Mode using the drop-down menu. Selecting Static will allow you to enter a static IP
address, subnet mask and default gateway using the text field provided. Selecting BOOTP or DHCP disables
these text boxes and auto assigns an IP address.
Enter a name for each IP address using the textfield provided and the Current Management Interface using the
drop-down menu box.
Click submit to save the changes.
Click Restart DHCP to assign a new IP address using DHCP.
To Next Page
Loading...
Need help?
General
