Cisco TELEPRESENCE MANAGEMENT SUITE User Manual

Installation and upgrade of Cisco TMS
Cisco TelePresence Management Suite Installation and Getting Started Guide Page 21 of 70
Figure 6 IP zone and ISDN zone.
 Name – A descriptive name for the zone, normally referencing the city or building.
 Country – The country this zone is located in. This is used for ISDN dialing information.
 Area Code – The area code (if applicable) for the location. This is used for ISDN dialing
information.
 To access an outside line [..] – The prefix (if any) to reach an outside line on your ISDN circuits.
This is used for ISDN dialing information.
 Default Time Zone – Select the default time zone for new systems and users. Specific settings
for each user or device can be changed later.
Complete the Zone information and click Next.
14. Verify all settings in the summary page and click Next.
Figure 7 The summary page.
This completes the installation of the Cisco TMS software. Go to the online Cisco TMS user guide,
available via the question mark icon (?) on the Cisco TMS client, for further configuration and user
information.

Cisco TELEPRESENCE MANAGEMENT SUITE Specifications

General

Brand	Cisco
Model	TELEPRESENCE MANAGEMENT SUITE
Category	Software
Language	English