Cisco TelePresence SX20 Reference Guide

March 2023 | pg. 5
Hooking up your Laptop and Content Sharing
1. Connect the presentation cable from the
videoconference system to the laptop
2. Power on your laptop/computer.
3. Press the same keys you would use when
displaying your desktop through a projector,
usually one of the following combinations:
Fn+F4 (or) Fn+F7 (or) Fn+F8 or Windows + P
4. To display the laptop: Select the Share
icon.
5. To return to the camera view:
Press the Stop Share icon.
Make sure to switch between the
laptop and camera view for more
interactive presentations.
If the laptop does not appear on the screen,
you may need to change the resolution of
your computer. Select 1024 x 768 for the
best results.
BEST PRACTICE
TROUBLESHOOTING

Cisco TelePresence SX20 Specifications

General

Digital zoom	5 x
Optical zoom	2.5 x
Aspect ratio	16:9
Supported video modes	1080p, 576p, 720p
Supported graphics resolutions	176 x 144, 352 x 288, 704 x 576, 720 x 480, 720 x 576, 1280 x 768, 1280 x 800, 1280 x 960, 1024 x 576 (WSVGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
Line-in	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Voice codecs	G.711, G.722, G.722.1

Weight and Dimensions

Depth	180 mm
Width	300 mm
Height	34 mm
Weight	1400 g