Cisco Telepresence System EX60

40
D1501601 User guide EX60 & EX90
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Cisco TelePresence System EX60 & EX90 User guide
www.cisco.com
Settings > Administrator Settings > Call Settings
Call Settings
The Call Settings window lets you specify:
• Auto Answer On or O. If you set this to On, the
system will respond automatically to incoming
calls. Note that the microphone will NOT be muted.
If risk of eavesdropping is an issue, you may want
to set this setting to O.
• Auto Answer Delay. Specify the time until your
system actually responds to an incoming call.
• Default Call Rate. If your connection has limited
capacity you may want to use this setting.
• Max Incoming/Outgoing Bandwidth. You may
specify these separately. May come in handy if
you are on an asymmetric connection.
• Default Call Protocol. Specify which protocol to
use as default.
Note how the settings chosen are indicated. In the
example shown, Auto Answer is set to O.
The Settings
Table of Contents
Getting started
Video meetings
Scheduled meetings
Managing Contacts