Cisco UCS C Series - Retrieving Event Service

• Setting MAC-Address (to AUTO), on page 125
• Configuring iSCSI Boot when PXE Boot is Enabled, on page 125
• Editing iSCSI Boot Values, on page 126
• Editing iSCSI Boot Values – Authentication Mode, on page 126
• Setting WWPN and WWNN to Auto, on page 127
• Adding Boot Target Entries, on page 127
• Deleting Boot Targets, on page 127
• Setting Power Limits Attributes, on page 127
• Setting DHCPv4 Attributes, on page 128
• Setting DHCPv6 Attributes, on page 128
• Setting IPv6 Attributes, on page 128
• Setting Auto Negotiation, Speed, and Duplex, on page 129
• Setting Hostname, on page 129
• Setting DNS, on page 129
• Setting IPv4, on page 130
• Setting VLAN, on page 130
• Setting LDAP Attributes, on page 130
• Setting Systems Attributes, on page 131
• Eject VMedia, on page 131
Retrieving Event Service
Request:
curl -k -u admin:Password https://10.10.10.10/redfish/v1/EventService
Response:
{
"Subscriptions":{
"@odata.id":"/redfish/v1/EventService/Subscriptions"
},
"Id":"EventService",
"Status":{
"State":"Disabled",
"Health":"OK"
},
"Name":"Event Service",
"ServiceEnabled":false,
"Description":"Event Service represents the properties for the service",
"@odata.type":"#EventService.v1_2_0.EventService",
"DeliveryRetryIntervalSeconds":30,
"@odata.context":"/redfish/v1/$metadata#EventService",
"DeliveryRetryAttempts":3,
Cisco UCS C-Series Servers REST API Programmer's Guide
110
Cisco IMC REST API Examples
Examples of Server Tasks for 4.0(4)