To Next PageTo Next Page
Need help?Do you have a question about the Cisco UCS 6454 and is the answer not in the manual?
General| Product Type | Fabric Interconnect |
|---|---|
| Ports | 54 |
| USB Ports | 1 x USB 2.0 |
| Form Factor | 1 RU |
| Management | Cisco UCS Manager |
| Port Types | FCoE, FC |
| Downlink Ports | 48 x 10/25 Gbps SFP28 |
| Management Ports | 1 x 1 Gbps RJ45 |
| Console Ports | 1 x RJ45 |
| Latency | Less than 1 microsecond |
| Redundancy | Redundant power supplies and fans |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5 to 95% relative humidity, noncondensing |
| Power Supply | 650W AC, hot-swappable |
Details the switch, its ports (unified, uplink, management), power supplies, and fan modules.
Lists supported SFP, SFP+, QSFP, and Fibre Channel transceivers and cables for various speeds.
Covers preparation, safety instructions, considerations, and warnings before installing the fabric interconnect.
Covers unpacking, inspecting, grounding procedures, and preventing ESD damage during installation.
Provides steps for installing the chassis in a rack and powering on the system for initial use.
Details connecting to the console port for management and the Ethernet management port to a network.
