Cisco UCS 6454 - CHAPTER 6 Cable and Port Specifications; Accessory Kit for the Cisco UCS Fabric Interconnect

CHAPTER 6
Cable and Port Specifications
• Accessory Kit for the Cisco UCS Fabric Interconnect, on page 47
• Console Cable, on page 48
• Console Port, on page 48
• Supported AC Power Cords and Plugs, on page 49
Accessory Kit for the Cisco UCS Fabric Interconnect
The Cisco UCS Fabric Interconnect accessory kit includes the following items:
• 2 slider rails
• 2 rack-mount guides
• 2 rack-mount brackets
• 12 M4 x 0.7 x 8-mm Phillips countersunk screws
• 10 10-32 rack nuts
• 10 10-32 x 3/4-inch Phillips pan-head screws
• 1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter
• 1 ground lug kit
• 1 ESD wrist strap
• 1 power cord clip (a wire clip that is used to retain the power cord)
• 1 pointer document (specifies where to find the online product documentation)
Additional parts can be ordered from your customer service representative.
Note
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
47