Cisco UCS 6454 User Manual

CHAPTER 5
Technical Specifications
• System Specifications, on page 43
• Power Specifications, on page 43
• Transceiver Specifications, on page 45
System Specifications
Table 8: Physical Specifications
SpecificationDescription
Physical (Cisco UCS 6454 Fabric Interconnect)
1.72 in. x 17.3 in. x 22.5 in. (4.4 cm x 43.94 cm x 57.1
cm)
Dimensions (H x W x D)
22 lb (9.97 kg)Weight (with two power supplies installed)
Environmental
32 to 104°F (0 to 40°C)
Temperature, operating
-40 to 158°F (-40 to 70°C)Temperature, nonoperating
5 to 95%Humidity (RH), noncondensing
0 to 10000 ft (0 to 3000 m)Altitude
Power Specifications
Cisco UCS Fabric Interconnect supports AC or DC power supplies. You must use identical power
supplies—either two AC or two DC power supplies with the fabric interconnect. In addition, if you use a DC
power supply, you must use two corresponding DC power cords. The Cisco UCS 6454 Fabric Interconnect
and the UCS 6300 Series Fabric Interconnect utilize the same power supplies.
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
43

Cisco UCS 6454 Specifications

General

Product Type	Fabric Interconnect
Ports	54
USB Ports	1 x USB 2.0
Form Factor	1 RU
Management	Cisco UCS Manager
Port Types	FCoE, FC
Downlink Ports	48 x 10/25 Gbps SFP28
Management Ports	1 x 1 Gbps RJ45
Console Ports	1 x RJ45
Latency	Less than 1 microsecond
Redundancy	Redundant power supplies and fans
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5 to 95% relative humidity, noncondensing
Power Supply	650W AC, hot-swappable