CHAPTER 3
Connecting the Cisco UCS Fabric Interconnect
• Preparing for Network Connections, on page 31
• Connecting to the Console Port, on page 31
• Connecting the Management Port, on page 33
• Connecting to an SFP28 Ethernet or Fibre Channel Port, on page 33
• Maintaining SFP28 Transceivers and Fiber-Optic Cables, on page 36
Preparing for Network Connections
The Cisco UCS Fabric Interconnect provides the following types of ports:
• RS-232 port to create a local management connection.
• Ethernet ports, encrypted and unencrypted, to connect to a LAN.
• Fibre Channel ports to connect to a SAN.
When preparing your site for network connections to the Cisco UCS Fabric Interconnect, consider the following
for each type of interface, and gather all the required equipment before connecting the ports:
• Cabling required for each interface type
• Distance limitations for each signal type
• Additional interface equipment required
You can save time and confusion when making cabling changes if you make a
copy of the and keep it accurate for your current configuration.
Tip
Connecting to the Console Port
You can connect the console port to a modem. If you do not connect it to a modem, connect it either before
powering on the system or after the system has completed the boot process.
Caution
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
31
To Next Page
Loading...
Need help?
General
