Transceiver Specifications
Table 11: General Specifications for the 10-Gigabit Ethernet SFP+ Transceiver Module
Short RangeDescription
LCConnector type
850 nmWavelength
62.5 microns—33 m
50 microns—300 mCore size—Cable distance
Environmental Conditions and Power Requirements Specification for SFP
Transceivers
Table 12: Environmental Conditions and Power Requirements Specifications for SFP Transceivers
MaximumMinimumSymbolParameter
85°C (185°F)-40°C (-40°F)TSStorage temperature
1
70°C (158°F)0°C (32°F)TCCase temperature
2,
95%5%RHRelative humidity
2
3.5 V3.1 VVCCT,RModule supply voltage
2
1
Absolute maximum ratings are those values beyond which damage to the device may occur if these
limits are exceeded for other than a short period of time.
2
Functional performance is not intended, device reliability is not implied, and damage to the device may
occur over an extended period of time between absolute maximum ratings and the recommended
operating conditions.
General Specifications for Cisco Fibre Channel SFP Transceivers
The table below lists the general specifications for Cisco Fibre Channel SFP transceivers at 4 Gbps.
Table 13: General Specifications for Cisco Fibre Channel SFP Transceivers at 4 Gbps
Short WavelengthDescription
LCConnector type
850 nmWavelength
MMFFibre type
62.5 microns—164.04 yd (150 m)
50 microns—328.08 yd (300 m)Core size—Cable distance
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
45
Technical Specifications
Transceiver Specifications
To Next Page
Loading...
Need help?
General
