Cisco UCS C Series - Examples of New Additions in 3.1(3) Release

"PrivilegeMap":{
"@odata.id":"/redfish/v1/AccountService/PrivilegeMap"
},
"Name":"Account Service",
"Roles":{
"@odata.id":"/redfish/v1/AccountService/Roles"
},
"@odata.type":"#AccountService.1.0.0",
"ServiceEnabled":true,
"AuthFailureLoggingThreshold":0,
"@odata.id":"/redfish/v1/AccountService",
"@odata.context":"/redfish/v1/$metadata#AccountService"
}
Examples of New Additions in 3.1(3) Release
This section includes the following examples on how to use the REST API to perform common server tasks
for 3.1(3) release:
• Retrieving Cisco IMC Managers Ethernet Interfaces and NICS, on page 60
• Retrieving Cisco IMC Log Entries, on page 61
• Retrieving BIOS Tokens, on page 62
• Configuring BIOS Tokens, on page 64
• Resetting BIOS Action, on page 66
• Retrieving Storage Collection, on page 66
• Retrieving Individual Storage Controller, on page 66
• Retrieving Individual Drives, on page 67
• Performing SecureErase on Drives, on page 68
• Retrieving Volumes, on page 68
• Retrieving Individual Volumes, on page 69
• Performing Initialize Action on Volumes, on page 69
• Performing SetEncryptionKey Action on Storage Controller, on page 70
• Retrieving FlexFlash Storage Information, on page 70
• Getting DHCP and NTP in ManagerNetworkProtocol, on page 71
• Retrieving Memory Collection, on page 71
• Retrieving Individual DIMM, on page 72
• Retrieving Network Adapter Collection, on page 73
• Retrieving Network Adapter, on page 73
• Performing Reset Settings to Default Action on Network Adapter, on page 74
• Retrieving Network Device Function Collection, on page 74
• Retrieving Network Device Function, on page 75
Cisco UCS C-Series Servers REST API Programmer's Guide
59
Cisco IMC REST API Examples
Examples of Server Tasks for 3.1(3)