Cisco UCS C220 M3 Quick Start Guide

11
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
78-21007-01
If You Need to Return Your Bundle to Cisco
Step 10 Set the Windows auto update option to “Check for updates but let me choose whether to download and
install them.”
Step 11 Configure the static IPv4 IP address for the NIC and enable RDP if needed.
Step 12 Configure the custom virtual memory for C: as specified below:
• For installed RAM = 16 GB, configure Initial = 16384 MB and Max = 24576 MB.
• For installed RAM = 24 GB, configure Initial = 24576 MB and Max = 36864 MB.
Step 13 Activate Windows using the physical key shipped with the product.
Step 14 Install the Security Manager 4.3 server application on the server in the following path:
D:\Program Files\CSCOpx
a. Refer to the Security Manager installation guide for installing Security Manager:
http://www.cisco.com/en/US/products/ps6498/prod_installation_guides_list.html
b. If you are installing Security Manager on a server with 24 GB RAM, then log in as the Windows
Administrator and execute the command shown below to create a temporary file in D:\ before
starting the Security Manager installation.
fsutil file createnew D:\file-to-delete 536870912000
c. Delete the temporary file after the Security Manager installation is complete:
del D:\file-to-delete
Step 15 Download and install the latest service pack for Cisco Security Manager 4.3.
Step 16 Update the Event store size as specified below from the Security Manager client:
a. Navigate to Configuration Manager > Tools > Security Manager Administration >
Event Management.
b. For installed RAM = 16 GB, configure “Event data store disk size” = 1000.
c. For installed RAM = 24 GB, configure “Event data store disk size” = 2000.
Step 17 Download and restore the Security Manager database backup created earlier (please refer to the Caution
immediately preceding this procedure); doing so also will restore the Security Manager license.
If You Need to Return Your Bundle to Cisco
If you need to return your Bundle to Cisco because of hardware failure or some other reason that requires
you to request an RMA, please note the following:
• When returning your Bundle to Cisco, be sure to include everything that was shipped to you. In
particular, please be sure to return the recovery media; the Microsoft Certificate of Authenticity
(COA) label is placed on the recovery media sleeve and must be returned.
Related Documentation
The following documentation is for the Software (Cisco Security Manager 4.3) in this Bundle:
• “Guide to User Documentation for Cisco Security Manager 4.3” (the “documentation roadmap”):
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security
_manager/4.3/roadmap/CSM43Map.html
• Main page for Cisco Security Manager on Cisco.com: http://www.cisco.com/go/csmanager

Cisco UCS C220 M3 Specifications

General

Tcase	70 °C
Bus type	QPI
Stepping	M1
FSB Parity	No
Scalability	2S
Processor cache	10 MB
Processor cores	4
System bus rate	6.4 GT/s
Processor series	Intel Xeon E5-2600
Processor socket	LGA 2011 (Socket R)
Processor codename	Sandy Bridge EP
Processor frequency	2.4 GHz
Processor cache type	Smart Cache
Processor manufacturer	Intel
Processor package size	52.5 x 45.0 mm
Processor front side bus	- MHz
Processor boost frequency	2.50 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Graphics & IMC lithography	32 nm
PCI Express configurations	x4, x8, x16
Supported instruction sets	AVX
Thermal Design Power (TDP)	80 W
Number of processors installed	2
CPU multiplier (bus/core ratio)	24
Physical Address Extension (PAE)	46 bit
Maximum number of PCI Express lanes	40
Memory types supported by processor	DDR3-SDRAM
Memory channels supported by processor	Quad
Memory clock speeds supported by processor	800, 1066 MHz
Memory bandwidth supported by processor (max)	34.1 GB/s
Maximum internal memory supported by processor	750 GB
HDD size	2.5 \
HDD interface	-
Total storage capacity	500 GB
Compatible memory cards	SD
Maximum storage capacity	- TB
Memory slots	16
Internal memory	32 GB
Memory clock speed	1866 MHz
Maximum internal memory	- GB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	3
Chassis type	Rack (1U)
Power supply	450 W
Safety	UL 60950-1 No. 21CFR1040, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 2001
Certification	47CFR Part 15 (CFR 47), AS/NZS CISPR22, CISPR2 2, EN55022, ICES003, VCCI, EN61000-3-2, EN61000-3-3, KN22, CNS13438, EN55024, CISPR24, EN300386, KN24
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 12000 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 93 %
Operating relative humidity (H-H)	10 - 90 %
PCI Express slots version	3.0
Processor ARK ID	64588
Intel Secure Key Technology version	1.00
Intel Identity Protection Technology version	0.00
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	724 mm
Width	430 mm
Height	43.2 mm