Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
33
STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARM
The reversible cable management arm mounts on either the right or left slide rails at the rear of
the server and is used for cable management. Use
Table 14 to order a cable management arm.
For more information about the cable management arm, see the Cisco UCS C220 M3 Installation
and Service Guide at this URL:
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/C220.pdf
Table 14 Cable Management Arm
Product ID (PID) PID Description
UCSC-CMA1 Cable Management Arm for C220 rack servers
To Next Page
Loading...
