Cisco UCS C240 M3 Manual

Cisco UCS C240 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
CONFIGURING the SERVER
9
STEP 1 VERIFY SERVER SKU
Verify the product ID (PID) of the server as shown in Table 2.
The Cisco C240 M3 server:
■ Includes one tool-less rail kit, adjustable from 26 inches (660 mm) to 36 inches (914 mm)
■ Does not include power supply, CPU, memory, hard disk drives (HDDs), SD card, or plug-in
PCIe cards.
Table 2 PID of the C240 M3 High-Density LFF Rack Base Server
Product ID (PID) Description
UCSC-C240-M3L UCS C240 M3 LFF, no CPU, memory, HDD, power supply, SD card, or PCIe cards,
with rail kit
NOTE: Use the steps on the following pages to configure the server with
the components that you want to include.

Cisco UCS C240 M3 Specifications

General

Processor cores	8
Processor model	E5-2600
Processor frequency	2.7 GHz
Number of processors installed	2
HDD size	2.5 \
RAID support	Yes
HDD interface	-
Optical drive type	No
Total storage capacity	300 GB
Maximum storage capacity	- TB
Number of HDDs installed	16
Memory slots	24
Internal memory	96 GB
Memory clock speed	1866 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	- GB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express x8 slots	3
Chassis type	Rack (2U)
Power supply	650 W
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 12000 m
Operating temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 93 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	712 mm
Width	445 mm
Height	87 mm