Cannot Session into CIMC with Active Directory Authentication
This problem occurs if you did not provide your full domain name followed by your username. To resolve
this problem, provide your full domain name followed by your username. For example:
CIMC login: cert.cisco.com\adadmin
Password:
PING 172.19.159.52 (172.19.159.52): 56 data bytes
64 bytes from 172.19.159.52: seq=0 ttl=128 time=0.000 ms
--- 172.19.159.52 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 0.000/0.000/0.000 ms
Determining Version Information
Determining the Cisco IOS Version Installed on the Router
The supported Cisco IOS software version on E-Series Servers is 15.2(4)M and later versions. For details,
see the “Verifying the Router, E-Series Server, and Cisco IOS Software Version Compatibility” section
in the getting started guide for the version of the CIMC that you are using. The getting started guides are
available at: http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-e-series-servers/
products-installation-guides-list.html.
Note
•
The Cisco 2921 and 2951 series routers support 4-core only.
To determine the Cisco IOS version, use the show version or the show inventory command from the router:
Router> show version
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 1048576K/63488K bytes of
memory.
1 cisco UCSE Module(s)
Router>
show inventory
NAME: “UCSE Server Module on Slot 4", DESCR: “UCSE Server Module”
PID: UCS-E140D-M1/K9 , VID: V00 , SN: FOC16161F5E
Determining Information About the E-Series Server Through Diagnostics
To determine the type of E-Series Server that is installed in the router and in which slot it is installed, use the
show diag command from the router:
Router>
show diag
Slot 4:
UCSE Double Wide Module Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 4d18h ago
Product (FRU) Number : UCS-E140D-M1/K9
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
8
Overview
Determining Version Information
To Next Page
Loading...
Need help?
General
