CHAPTER
2-1
Cisco CSS UCS Platform Series User Guide, KIN-UCSM5-1RU-K9 / KIN-UCSM5-2RU-K9
2
Supported Applications
The KIN-UCSM5-1RU-K9 and KIN-UCSM5-2RU-K9 servers support the following application:
• Cisco Video Surveillance Manager, Release 7.11.1 and Higher, page 2-1
Cisco Video Surveillance Manager, Release 7.11.1 and Higher
• Overview, page 2-1
• Initial Setup Procedure, page 2-1
• Upgrading the Cisco VSM System Software, page 2-2
• Recovering the Cisco VSM System Software, page 2-2
• Supported RAID and Hard Drive Configurations (Cisco VSM), page 2-3
• More Information, page 2-5
Overview
The KIN-UCSM5-1RU-K9 and KIN-UCSM5-2RU-K9 servers support the Cisco Video Surveillance
Manager (Cisco VSM) Release 7.11.1 and higher, including associated servers and devices.
These servers are shipped as server appliances, meaning that the Cisco Video Surveillance Manager
system software is pre-loaded in a “bare-metal” configuration.
Note These servers do not currently support virtual machine (VM) installations.
Initial Setup Procedure
To install and configure a Cisco Connected Safety and Security UCS series server appliance for the first
time, complete the following high-level steps:
Procedure
Step 1 Physically install the Cisco Connected Safety and Security UCS series server and complete the initial
server setup.
To Next Page
Loading...
Need help?
General
