Cisco WBPN

Using the WBPN Wireless-N Bridge for Phone Adapters Configuration Utility
Performing Administrative Tasks
Cisco WBPN User Guide 31
2
Upgrading Firmware
STEP 1 From the Navigation Menu, choose Administration > Upgrade Firmware.
STEP 2 Click Browse and navigate to the firmware file. Select the file.
STEP 3 Click Apply. The upgrade takes several minutes; do not power off the WBPN
during the upgrade.
Saving and Reloading Your Configuration
To save your current configuration (for example, wireless device information such
as SSID, security, and password):
STEP 1 From the Navigation Menu, choose Administration > Save/Reload Configuration.
STEP 2 Under Save Settings to File , click Save and choose to save the file to your PC. The
configuration is saved as a .dat file.
To load a previously saved configuration:
STEP 1 From the Navigation Menu, choose Administration > Save/Reload Configuration.
STEP 2 Under Load Settings from File , click Browse and locate the saved configuration file
that you want to restore.
STEP 3 Click Apply.
Changing Your Username or Password
To change your username or password:
STEP 1 From the Navigation Menu, choose Administration > Change Password.
STEP 2 Enter the new username and/or password. Enter the new password again to
confirm. The default username and password (cisco) is not allowed. Passwords
must be a minimum of one character and a maximum of 30 characters.