Cisco WS-C2955T-12 User Manual

4-11
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Chapter 4 General Switch Administration
Default Settings
Security
Password None “Passwords” section on page 5-16 and
“Assigning Passwords and Privilege
Levels” section on page 6-11.
Refer to the latest switch release notes
(http://www.cisco.com/univercd/cc/td/doc/
product/lan/c2900xl/index.htm).
–
Address security Disabled “Managing the MAC Address Tables”
section on page 6-15.
Administration >MAC
Addresses
Trap manager 0.0.0.0 “Adding Trap Managers” section on
page 6-49.
Administration > SNMP
Community strings public “SNMP Community Strings” section on
page 5-16 and “Entering Community
Strings” section on page 6-49.
Documentation set for Cisco IOS
Release 12.0 on Cisco.com.
Administration > SNMP
Port security Disabled “Enabling Port Security” section on
page 7-10.
Port > Port Security
Protected port Disabled “Configuring Protected Ports” section on
page 7-9.
Port > Protected Port
Port security aging Disabled “Configuring Port Security Aging” section
on page 7-11.
–
Bridge Protocol Data Unit
(BPDU) Guard
Disabled “Configuring BPDU Guard” section on
page 6-47.
–
Terminal Access Controller
Access Control System
Plus (TACACS+)
Disabled “Configuring TACACS+” section on
page 6-51.
–
Remote Authentication
Dial-In User Service
(RADIUS)
Disabled “Controlling Switch Access with
RADIUS” section on page 6-55.
–
1. Available only from a Device Manager session on a command-capable switch, which is not a cluster member.
2. Available only from a cluster management session.
Table 4-2 Default Settings and Where to Change Them (continued)
Feature
Default
Setting Concepts and CLI Procedures CMS Option

Cisco WS-C2955T-12 Specifications

General

Brand	Cisco
Model	WS-C2955T-12
Category	Switch
Language	English